Related Manuals for J-Tech Digital JTD-657
Summary of Contents for J-Tech Digital JTD-657
- Page 1 USER MANUAL H.264 / H.265 HDMI Encoder with NDI JTD-657 | jtech-ench5ndi J-TECH DIGITAL INC. 9807 EMILY LANE STAFFORD, TX 77477 TEL: 1-888-610-2818 E-MAIL: SUPPORT@JTECHDIGITAL.COM...
-
Page 2: Table Of Contents
Table of Contents 1. Features ..................4 2. Package Contents ................4 3. Hardware Description ..............4 4. Typical Application ................. 5 5. Connection Configuration ............... 6 5.1 Change the IP Address of PC ..............6 5.2 Login for Configuration ................6 5.3 Check the Stream Address ................ - Page 3 10. Maintenance ................25 11. Warranty ..................25 12. Main-In Service ................25 13. Limited Warranty Limits and Exclusions ........25 P a g e...
-
Page 4: Features
Supports Image Parameter Settings • Supports Remote Management in WAN (webGUI) • Supports Customized Resolution Settings • 2. Package Contents (1) x J-Tech Digital JTECH-ENCH5NDI Encoder • (1) x Power Adapter DC12V 1A • (1) x User Manual • 3. Hardware Description... -
Page 5: Typical Application
4. Typical Application P a g e... -
Page 6: Connection Configuration
5. Connection Configuration 5.1 Change the IP Address of PC Assign the PC (or laptop) an IP address. On a Windows PC: Press the +R on your keyboard →Enter “control netconnections” in the run box and press enter → Right click on your wired ethernet adapter →... -
Page 7: Check The Stream Address
5.3 Check the Stream Address Stream addresses populate in the “Main Stream” category show in the red box below: P a g e... -
Page 8: Encoder Setting
6. Encoder Setting 6.1 Encoder Setting Click “Encoder” setting → “Main stream” → Configure your settings → Click Apply 6.2 Audio Setting Audio from HDMI Port: Click “Encoder” → “Audio” → Select “HDMI” from the drop-down menu for Audio Input → Click “Apply P a g e... - Page 9 Audio from the 3.5mm audio port: Click “Encoder” → “Audio” → Select “ANALOG” from the drop- down menu for Audio Input → Click “Apply” P a g e...
-
Page 10: Advanced
6.3 Advanced Click “Encoder” → “Advanced” → Configure your settings → Click “Apply”. 10 | P a g e... -
Page 11: Osd Setting
7. OSD Setting 7.1 Streaming OSD Setting Click “OSD” → “Network” → Configure your settings → Click “Apply” 7.2 Logo Uploading “LOGO upload” → Choose a bmp file that matches the requirements → Click “Apply” 11 | P a g e... -
Page 12: System
*Note: The above interface screenshot examples may show a difference with actual operation interface due to software upgrades. All screenshots are for reference only. 8. System 8.1 Network Click System → Network → Modify the network settings to match those of your network Click apply. -
Page 13: Change Password
8.2 Change Password System → Change password → Set your password → Apply 8.3 Reset System → Reset → Reset Note: This will set your device to the factory default. 13 | P a g e... -
Page 14: Reboot
8.4 Reboot System → Reboot → Reboot (please refresh the web page after 1 minute) 9. Application 9.1 User Application Example 9.1.1 Web Video Preview Status → Main Stream → Preview Internet Explorer Note: For , you can get preview window directly. Chrome , you must install an extension called "Native HLS Playback"... - Page 15 15 | P a g e...
-
Page 16: Vlc
Picture below shows the stream preview: 9.1.2 VLC Connect an HDMI source to the JTECH-ENCH5NDI encoder. Open VLC media player (Download link： http://www.videolan.org/)，Click “Media”, then click “Open Network Stream”. 16 | P a g e... - Page 17 Enter the Stream URL from the page of “Main stream”, click “Play”. Note: Please make sure that the stream type you choose is enabled in the encoder. 17 | P a g e...
-
Page 18: Ndi Stream
VLC Example: 9.2 NDI Stream Enable NDI URL and turn off the firewall on your computer. 18 | P a g e... -
Page 19: Multi Local User Application - Multicast
Open NDI player to play “stream1”. NDI player is available for download here (https://www.ndi.tv/tools/) 9.3 Multi Local User Application – Multicast If more than one local user needs to stream the video of the encoder simultaneously, you may enable multicast IP, then reboot the JTECH-ENCH5NDI encoder. 19 | P a g e... - Page 20 After the reboot, copy the multicast IP address from the Status page, and paste the IP address into VLC Player. This stream can be viewed by more than one user at the same time. 20 | P a g e...
-
Page 21: Local Surveillance System Application Nvr Connection
9.4 Local Surveillance System Application NVR Connection Confirm if your NVR supports the H.264 codec. Since we’re using ONVIF, you will need to enable the "RTSP" function as pictured below. If you need the NVR to recognize the audio of the HD Encoder, you will need to enable the Audio as below picture: 21 | P a g e... -
Page 22: Remote Multi User: Rtmp Connection
*Note: If you've enabled the ONVIF setting and still can't open the video, we suggest you download the ONVIF TEST tool. 9.5 Remote Multi User: RTMP Connection To stream over the web, to multiple locations, you may use RTMP. This encoder supports multiple platforms, including: YouTube Live, Facebook Live, DaCast, Red5, etc. -
Page 23: Rtmp: Stream To Youtube Live
9.6 RTMP: Stream to YouTube Live To stream to YouTube: access your YouTube Live settings (below) and combine your “Server URL” and “Stream name/key” (separated by a forward slash). rtmp://a.rtmp.youtube.com/live2/zc3e-yw22-bbdw-baeg Full RTMP URL Example: 23 | P a g e... - Page 24 Enter the full RTMP URL into the “RTMP PUBLISH URL” setting of your J-Tech Digital Encoder; apply and reboot. Note: For best results, check that “TS muxer” is set to “Compatible with FFMPEG” Check “Stream Health” in YouTube and adjust settings accordingly, per your specific stream requirements.
- Page 25 10. Maintenance Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner, or benzine to clean. 11. Warranty If your product does not work properly because of a defect in materials of workmanship, our company (referred to as “the warrantor”) will, for the length of the period indicated as below, “Parts and Labor (18) Months”, which starts with the date of original purchase (“Limited Warranty period”), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product.
- Page 26 THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTAIL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, travel to and from the service, loss of or damage to media or images, data or other recorded content.
- Page 27 WWW.JTECHDIGITAL.COM PUBLISHED BY J-TECH DIGITAL INC. 9807 EMILY LANE STAFFORD, TX 77477 TEL: 1-888-610-2818 E-MAIL: SUPPORT@JTECHDIGITAL.COM 27 | P a g e...
Need help?
Do you have a question about the JTD-657 and is the answer not in the manual?
Questions and answers