Page 2
The 18G Splitter Control Path has been tested for conformity to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment, the JTECH-4KSP4 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
INTRODUCTION Thanks for selecting the JTECH-4KSP4 1x4 HDMI splitter for your A/V solutions. This device lets you simultaneously distribute one HDMI input signal to up to 4 HDMI displays. It supports HDMI video resolutions up to 4K@60Hz 4:4:4, HDR10, Dolby Vision, firmware upgrades, and is HDCP 2.3 compliant.
DOWN-SCALING Video Resolution Down-scaling The product supports video resolution down-scaling, the 4K input can be automatically degraded to 1080p output for compatibility with 1080p display, shown in the below chart. Input Output Color Resolution Refresh Downscale 1080p Specs Space 3840x2160 60Hz 4:4:4 Support...
SPECIFICATION Video Input Input (1) HDMI input Input Connector (1) Type-A female HDMI HDMI Input Resolution Up to 4K@60Hz 4:4:4 HDMI Standard HDCP Version up to HDCP2.3 Video Output Output (4) HDMI Output Connector (4) Type-A female HDMI HDMI Output Resolution Up to 4K@60Hz 4:4:4 Control Control Part...
FIRMWARE UPGRADE Here are the steps to install firmware upgrades using the Micro-USB port: 1) Connect the splitter to the PC with USB cable. 2) Power on the splitter, and then the PC will automatically detect a U-disk named of “BOOTDISK”. 3) Double-click to open the U-disk, a file named of “READY.TXT”...
Page 8
Specifications, pictures & software described herein are subject to change without prior notification. Only use the provided power supply when operating this unit. J-Tech Digital® is not responsible for any damage due to customer neglect. All trademarks are the sole property of their respective companies.