Page 1
USER MANUAL DIGITAL TO ANALOG AUDIO DECODER JTD-820 J-TECH DIGITAL INC 12803 PARK ONE DRIVE SUGAR LAND, TX 77478 TEL: 1-888-610-2818 E-MAIL: SUPPORT@JTECHDIGITAL.COM...
1. Introduction The Digital to Analog Audio Decoder features an integrated 24 bit audio DSP. This unit can decode a variety of digital audio formats, including Dolby Digital (AC3), DTS and PCM. It can simply connect an Optical (Toslink) or Digital Coaxial Cable to the input, then the decoded audio can be transmitted as 2 channel analog audio via the Stereo RCA output or the 3.5mm output (suitable for headphones) simultaneously.
Page 4
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS and the Symbol together, and Digital Surround are registered trademarks or trademarks of DTS, Inc.
2. Features Decode Dolby Digital (AC3), DTS or PCM digital audio to stereo audio output. Support PCM 32KHz.44.1KHz, 48KHz, 88.2KHz, 96KHz, 176.4KHz, 192KHz sample frequency audio decode. Support Dolby Digital 5.1 channels, DTS-ES6.1 channels audio decode. No need to install drivers. Portable, flexible, plug and play.
3. Specifications Input Ports: 1 x Optical (Toslink), 1 x Digital Coaxial Output Ports: 1 x RCA (L/R), 1 x 3.5mm (Headphone) Signal to Noise Ratio: 103db Degree of Separation: 95db Frequency Response: (20Hz ~ 20KHz) +/- 0.5db Dimensions: 72mm(D)x55mm(W)x20mm(H). Weight : 40g...
4. Package Contents Before using this unit, please check the packaging and make sure the following items are contained in the shipping carton: 1) Audio Decoder ---------------1PCS 2) 5V/1A DC Adaptor----------------------1PCS 3) User Manual -------------------1PCS...
5. Panel Descriptions Please study the panel drawings below and be familiar with the signal input(s), output(s) and power requirements. Back Panel Top Panel Front Panel...
6. Connection Diagram 1. Connect a source (e.g. Blu-Ray Player, game console, A/V Receiver, etc.) to the audio Decoder’s SPDIF input port by fiber cable or Coaxial input port by coaxial cable. 2. Connect a headphone or analog audio amplifier to the audio output port on the Decoder.
Page 11
WWW.JTECHDIGITAL.COM PUBLISHED BY J-TECH DIGITAL, INC. 12803 PARK ONE DRIVE SUGAR LAND, TX 77478...
Need help?
Do you have a question about the JTD-820 and is the answer not in the manual?
Questions and answers