SOLTEK SL-67EB Plus Manual page 41

Onboard Parallel Choose the printer I/O address:
Port
Parallel Port
Mode
ECP Mode Use
DMA
EPP Mode
Select
Power On
Function
3. Press <ESC> and follow the screen instructions to save or disregard your
settings.
378H/IRQ7 (default), 3BCH/IRQ7,
278H/IRQ5, Disabled
Choose Normal (default), ECP/EPP
EPP, or ECP mode. The mode depends
on the external device connected to
this port.
Choose DMA3 (default) or DMA1. Most
sound cards use DMA1. Check with
your sound card configuration to make
sure that there is no conflict with this
function.
*: This option will not be displayed
unless the EPP/ECP function is
selected..
Choose EPP1.7 (default) or EPP1.9.
EPP1.9 supports hardware handshake.
This setting is dependent upon your
EPP device.
Note: The above 2 options will not be displayed
unless the EPP/ECP sfunction is selected.
Choose BUTTON ONLY ¡ ] d efault ¡ ^ ,
Password, Mouse Left or Mouse Right.
Mouse Left: Use the PS/2 mouse left to
boot the system.
Mouse Right: Use the PS/2 mouse right
to boot the system.
Password: Choose a special password
which is defined by the user or use one
of the HOT keys ¡ ] f rom CTRL-F1 to
CTRL-F12 ¡ ^ t o boot the system.
41