SOLTEK SL-67EB Plus Manual page 22

Boot Up Floppy
Seek
Boot Up
NumLock Status lets user activate the NumLock function
Gate A20 Option Choose Normal or Fast (default). This
Memory Parity
/ECC Check
Typematic Rate
Setting
Typematic Rate
(Chars/Sec)
Typematic Delay Choose 250 (default), 500, 750, and
(Msec)
Enabled (default): During POST,
BIOS checks the track number of the
floppy disk drive to see whether it is 40
or 80 tracks. Disabled: During POST,
BIOS will not check the track number of
the floppy disk drive.
Choose On (default) or Off. This option
at boot-up.
option allows the RAM to access the
memory above 1MB by using the fast
gate A20 line.
Choose Enabled or Disabled
Choose Enabled or Disabled(default).
Enable this option to adjust the
keystroke repeat rate.
Range between 6 (default) and 30
characters per second. This option
controls the speed of repeating
keystrokes.
1000. This option sets the time interval
for displaying the first and the second
characters.
22