Advertisement
Accessory and User-supplied Items
Accessory (included): ferrite core x 1
User-supplied (not included): RJ45 connector
Notes
- Connect this optional service card to the CO line through NT1; do
not connect to the CO line directly.
- T1 Card must be installed behind an FCC registered and UL or CSA-
NRTL listed CSU.
- When connecting the RJ45 connector, attach the included ferrite
core. Refer to "Attaching a Ferrite Core to the RJ45 Cable".
- To confirm the CO line connection, refer to "Confirming the CO
Line Connection" in "Starting the Hybrid IP-PBX".
CAUTION
T1 ports are SELV ports and should only be connected to SELV
services.
Switch Settings
Switch
Type
A/B
Slide
Keep the switch at default A position.
Do not change the position of this switch.
Pin Assignments
RJ45 Connector
Usage and Status Definition
7
Advertisement
