Advertisement
7.6. OUTLINE OF RESET SYSTEM
7.6.1. Reset Operation
A reset to CPU (IC1) (and the device under the control of CPU (IC1)) in this card is dominant in a
reset from the main frame (MPR), and normally it is only available for software command reset
or hardware reset using ASIC (IC2) from MPR. The power on reset circuit in this card is for the
reset of ASIC (IC2) in a hot plug.
Table 5.6 shows the Reset Type of the T1 card and Fig.5.8 shows the Reset System Diagram.
Table.5.6 Reset Class
25
Advertisement
