Advertisement
Operation
1. If the Hybrid IP-PBX does not operate properly:
A. Make sure that the System Clear Switch is set to the
"NORMAL" position.
B. Press the Reset Button.
2. If the Hybrid IP-PBX still does not operate properly:
A. Set the System Clear Switch to the "SYSTEM INITIALIZE"
position.
B. Press the Reset Button.
C. Return the System Clear Switch to the "NORMAL" position
while the RUN indicator is flashing (within approximately 10 s).
Note:
As a result of Step 2, all the programmed data will be cleared.
3. If the Hybrid IP-PBX still does not work, unplug the Hybrid IP-PBX
and plug it in again after 5 minutes.
4. If the Hybrid IP-PBX still does not work:
A. Unplug the Hybrid IP-PBX.
B. Set the System Clear Switch to the "SYSTEM INITIALIZE"
position.
C. Plug in the Hybrid IP-PBX.
D. Press the Reset Button.
E. Set the System Clear Switch to the "NORMAL" position while
the RUN indicator is flashing (within approximately 10 s).
Installing Optional Service Cards
11
Advertisement
