Canon i70 Quick Start Manual page 68

Appendix
Working around the Working around the
Working around the Working around the
printer printer
printer printer
Caution You may cause injury or damage the printer if you ignore any of these safety
precautions.
Choosing a location Choosing a location
Choosing a location Choosing a location
Power supply Power supply
Power supply Power supply
Working around the Working around the
Working around the Working around the
printer printer
printer printer
Print heads and ink tanks Print heads and ink tanks For safety reasons store print heads and ink tanks out of the reach of small children. Print heads and ink tanks Print heads and ink tanks
Universal AC Adapter Universal AC Adapter
Universal AC Adapter Universal AC Adapter
66
Do not use flammable sprays near the printer. Do not use flammable sprays near the printer.
Do not use flammable sprays near the printer. Do not use flammable sprays near the printer.
This could cause a fire or electric shock if the spray comes into contact with electrical components
inside the printer.
Do not install the printer in a location that is unstable or subject to excessive vibration. Do not install the printer in a location that is unstable or subject to excessive vibration.
Do not install the printer in a location that is unstable or subject to excessive vibration. Do not install the printer in a location that is unstable or subject to excessive vibration.
Do not install the printer in locations that are very humid or dusty, in direct sunlight, outdoors, or Do not install the printer in locations that are very humid or dusty, in direct sunlight, outdoors, or Do not install the printer in locations that are very humid or dusty, in direct sunlight, outdoors, or Do not install the printer in locations that are very humid or dusty, in direct sunlight, outdoors, or
close to a heating source. close to a heating source. close to a heating source. close to a heating source.
To avoid the risk of fire or electric shocks, install the printer in a location with an ambient
temperature range of 5°C to 35°C (41°F to 95°F) and humidity of 10% to 90% (condensation free).
Do not place the printer on a thick rug or carpet. Do not place the printer on a thick rug or carpet. Do not place the printer on a thick rug or carpet. Do not place the printer on a thick rug or carpet.
Ensure that the area around the power outlet is kept clear at all times so you Ensure that the area around the power outlet is kept clear at all times so you
Ensure that the area around the power outlet is kept clear at all times so you Ensure that the area around the power outlet is kept clear at all times so you
can easily unplug the power cord if necessary. can easily unplug the power cord if necessary. can easily unplug the power cord if necessary. can easily unplug the power cord if necessary.
Never remove the plug by pulling on the cord. Never remove the plug by pulling on the cord.
Never remove the plug by pulling on the cord. Never remove the plug by pulling on the cord.
Do not use an extension lead/ cord. Do not use an extension lead/ cord. Do not use an extension lead/ cord. Do not use an extension lead/ cord.
Never use a power supply source other than the one rated for the printer in the country where you Never use a power supply source other than the one rated for the printer in the country where you
Never use a power supply source other than the one rated for the printer in the country where you Never use a power supply source other than the one rated for the printer in the country where you
purchased the printer. purchased the printer.
purchased the printer. purchased the printer.
AC 100-127 V, 50/60 Hz AC 100-127 V, 50/60 Hz
AC 100-127 V, 50/60 Hz AC 100-127 V, 50/60 Hz
AC 220-240 V, 50/60 Hz AC 220-240 V, 50/60 Hz AC 220-240 V, 50/60 Hz AC 220-240 V, 50/60 Hz
Never put your hands or fingers in the printer while it is printing. Never put your hands or fingers in the printer while it is printing.
Never put your hands or fingers in the printer while it is printing. Never put your hands or fingers in the printer while it is printing.
Do not carry or store the printer with the round side down. Do not carry or store the printer with the round side down. Do not carry or store the printer with the round side down. Do not carry or store the printer with the round side down.
A failure can result. A failure can result.
A failure can result. A failure can result.
Do not place metal objects (paper clips, staples, etc.) or containers of flammable solvents Do not place metal objects (paper clips, staples, etc.) or containers of flammable solvents
Do not place metal objects (paper clips, staples, etc.) or containers of flammable solvents Do not place metal objects (paper clips, staples, etc.) or containers of flammable solvents
(alcohol, thinners, etc.) on top of the printer. (alcohol, thinners, etc.) on top of the printer. (alcohol, thinners, etc.) on top of the printer. (alcohol, thinners, etc.) on top of the printer.
If any foreign object (mental or liquid) fall into the printer, unplug the power cord and call for If any foreign object (mental or liquid) fall into the printer, unplug the power cord and call for
If any foreign object (mental or liquid) fall into the printer, unplug the power cord and call for If any foreign object (mental or liquid) fall into the printer, unplug the power cord and call for
service. service.
service. service.
For safety reasons store print heads and ink tanks out of the reach of small children. For safety reasons store print heads and ink tanks out of the reach of small children. For safety reasons store print heads and ink tanks out of the reach of small children.
If a child ingests any ink, consult a doctor immediately.
Do not shake print heads or ink tanks. Do not shake print heads or ink tanks. Do not shake print heads or ink tanks. Do not shake print heads or ink tanks.
Ink may leak out and stain clothing or the surrounding area.
When you pack the universal AC adapter for travel or storage, never wrap the cord around the body
of AC adapter to prevent the cord from splitting or separating from the body of the AC adapter and
causing a short circuit.