Cannot Print Properly Through Infrared Transmission - Canon i70 Quick Start Manual

Troubleshooting

Cannot Print Properly through Infrared Transmission

Possible Cause
Problem
Cannot Print The required driver
Properly through is not installed
Infrared
Transmission
The infrared
communication
driver is inactive
- Windows 98
The installation
place, distance,
and/or angle is
improper
Your computer is
not a PC/AT
compatible
machine or the
infrared port used
does not conform
to IrDA 1.1
56
• When using other than Windows 95, Windows 98 or later must have been
preinstalled and Microsoft Infrared Communication Driver must be installed
in the computer.
• When Windows 95 is used, Microsoft Infrared Communication Driver Version
2.0 must be installed in the computer.
See "Printing Data through Infrared Transmission Printing Data through Infrared Transmission" on page 11.
Printing Data through Infrared Transmission Printing Data through Infrared Transmission
Start the infrared monitor and check whether the infrared transmission driver is
active.
1. Click Start Start, Settings Settings, and Control Panel
Start Start Settings Settings
2. Double-click Infrared Monitor. Infrared Monitor. Infrared Monitor. Infrared Monitor.
3. Click the Options Options tab. Options Options
4. Check the Enable infrared communication Enable infrared communication Enable infrared communication check box. Enable infrared communication
Note When the transmission speed is set to 4 Mbps, operation of
the printer may become unstable depending on the type of
your computer. In this case, check the Limit connection
speed to: check box and click speed to: speed to: speed to:
Check the installation place, distance, or angle according to the Section
" Printing Data through Infrared Transmission."
The infrared transmission function of this printer can be used only with the PC/
AT compatible machine or the PDA that has an infrared port conforming to IrDA
1.1. Other computers and PDAs cannot be used for printing through infrared
transmission.
Try This
Control Panel.
Control Panel Control Panel
to select [115.2kbps
Limit connection Limit connection Limit connection
115.2kbps]. 115.2kbps 115.2kbps