Canon i70 Quick Start Manual page 14

Basic Printing
Note
Performing Infrared Transmission
When performing infrared transmission, also refer to your computer or PDA manual.
1
Set up the Printer.
(1) Ensure that the universal AC adapter is connected securely.
When using an optional battery, ensure that it has been charged.
(2) Open the paper rest and turn on the printer.
(3) Load the paper on the paper rest.
12
When using other than Windows 95, Windows 98 or later must have
been pre-installed and Microsoft Infrared Communication Driver
must be installed on your computer.
When using Windows 95, IrDA 1.0 (baud rate: max. 115.2 kbps) is
used for data transmission. In this case, Microsoft Infrared
Communications Driver Version 2.0 must be installed in your
computer. Refer to your computer's operation manual for more
details.
When using Windows 98 or Windows 95, check whether the infrared
transmission driver has been installed. To activate the infrared port,
carry out the following operation:
1.Click Start Start, then click Settings Start Start
2.Check whether the Infrared
If this icon is displayed, the required infrared driver has already
been installed. Refer to your computer's operation manual for
more details.
3.Double-click the Infrared
4.Check the Enable infrared communication Enable infrared communication. check box is on
Enable infrared communication Enable infrared communication
(Windows 98) or Enable infrared on
on. If the check box is not selected, select it.
When using Windows Me, check whether the infrared
communication driver has been installed following the procedure
below.
1.Click Start Start, then click Settings Start Start
2.Check whether the Wireless Link
If this icon is not displayed, there is a possibility that the infrared
communication driver has not been installed. Refer to your
computer's operation manual for more details.
Settings and Control Panel Settings Settings Control Panel Control Panel. Control Panel
Infrared icon is displayed in the window.
Infrared Infrared
Infrared icon. Infrared Infrared
Enable infrared on: check box (Windows 95) is
Enable infrared on Enable infrared on
Settings and Control Panel Settings Settings Control Panel. Control Panel Control Panel
Wireless Link icon is displayed.
Wireless Link Wireless Link