Canon i70 Quick Start Manual page 56

Troubleshooting
Problem Possible Cause
Printer driver is not
installed properly
Not enough
memory
"Error No.: X202"
Printer driver fault
"Error No.: X203"
Printer not ready
"Error No.: X300"
Printer not properly
connected
Printer not selected
in chooser
A message asking If the ink tank has
whether the ink tank been replaced with
has been replaced a new one
appears
The ink tank has
been removed but a
new ink tank has
not been installed
54
Uninstall then reinstall the printer driver.
1. Click Start Start, and select All Programs
Start Start
2. Follow the on-screen instructions to uninstall driver.
3. Follow the procedures described in the
the printer driver.
Increase available memory by closing any other applications currently running.
Uninstall, then reinstall printer driver.
User's Guide for instructions on how to uninstall the printer driver.
Refer to the
If the POWER POWER lamp is off, turn the printer on.
POWER POWER
If the POWER POWER lamp is flashing green, the printer is initializing. Wait until the
POWER POWER
POWER POWER lamp stops flashing.
POWER POWER
Ensure the printer is securely connected to the computer.
Note If you are using switching hub or other device, disconnect
the printer and reconnect it directly to the computer and try
printing again.
If successful, the problem may have been with the device.
There could also be a problem with the cable(s). Replace the
cable(s) and try printing again.
1. From the Apple Apple menu, select Chooser
Apple Apple
2. Click the i70 i70 icon and ensure that the i70 is selected as the target connection.
i70 i70
If not, select it.
Note If the problem persists, delete all unnecessary documents
from the Extensions and Control Panels folder.
Click Yes Yes or OK OK to reset the ink counter.
Yes Yes OK OK
See "Resetting the Ink Counter Resetting the Ink Counter Resetting the Ink Counter Resetting the Ink Counter" on page 44.
Click Cancel Cancel on the dialog box described above.
Cancel Cancel
You can choose the option to disable the display of this confirmation message.
1. Ensure the printer is on and open the Printer Properties
2. On the Maintenance Maintenance Maintenance tab, click Low Ink Maintenance
3. Clear a check box of Display a confirmation message of Ink tank replacement Display a confirmation message of Ink tank replacement Display a confirmation message of Ink tank replacement Display a confirmation message of Ink tank replacement
and click Send Send. Send Send
1. Ensure the printer is on and open the Page Setup
2. Click Utilities Utilities to open the Printer Utility
Utilities Utilities
3. Select Remaining Ink level Setting Remaining Ink level Setting from the pull-down menu and click Low
Remaining Ink level Setting Remaining Ink level Setting
Ink Warning Setting. Ink Warning Setting
Ink Warning Setting Ink Warning Setting
4. Clear a check box of Display a confirmation message of Ink tank replacement Display a confirmation message of Ink tank replacement
Display a confirmation message of Ink tank replacement Display a confirmation message of Ink tank replacement
and click Send Send. Send Send
Try This
All Programs (or Programs Programs), Canon i70
All Programs All Programs Programs Programs
Easy Setup Instructions and reinstall
Chooser.
Chooser Chooser
Printer Properties Printer Properties dialog box. Printer Properties
Low Ink Low Ink Low Ink Warning Setting Warning Setting. Warning Setting Warning Setting
Page Setup dialog box.
Page Setup Page Setup
Printer Utility dialog box.
Printer Utility Printer Utility
Canon i70, and Uninstall Uninstall.
Canon i70 Canon i70 Uninstall Uninstall
Low
Low Low