Canon i70 Quick Start Manual page 59

Possible Cause
Problem
Cannot Print The selected printer
Properly through port is wrong
Infrared
Transmission
(continued)
Check the printer port setting.
1. Open the printer driver Properties dialog box from the Start
2. Click the Details Details tab to ensure that the infrared port is selected as the Details Details
destination port.
• When using Windows XP or Windows 2000
The port [IR] is used as the infrared transmission port.
• When using Windows Me, Windows 98 or Windows 95
The infrared port name is followed by the text "Infrared Printing (LPT) Port"
which is enclosed in parentheses.
Example: LPT3: (Infrared Printing (LPT) Port)
* A port other than the LPT3 port may be selected depending on the
computer setting.
Note To check whether the printer is connected to the computer
through infrared transmission, follow the procedure below.
• When using Windows XP, Windows 2000 or Windows Me
1. When the infrared port of the computer or PDA is moved
close to the infrared port of the printer, the Wireless Link
icon appears on the task bar.
2. Place the cursor on the Wireless Link
If "i70 is in range" is displayed, the printer is ready for
printing.
If the name of another unit is displayed, change its
orientation or turn it off.
• When using Windows 98 or Windows 95
Start the infrared monitor to check whether Infrared
Communication Driver is active.
1. Click Start
2. Double-click the Infrared
3. Check whether "i70 is in range" is displayed on the
Status tab. Status Status Status
If the name of another unit is displayed, change its
orientation or turn it off.
Try This
Wireless Link icon. Wireless Link Wireless Link
Start, then click Settings Settings and Control Panel
Start Start Settings Settings
Infrared icon.
Infrared Infrared
Troubleshooting
Start menu. Start Start
Wireless Link Wireless Link Wireless Link
Control Panel.
Control Panel Control Panel
57