Install The Ink Tanks - Canon imagePROGRAF iPF760 Setup Manual

Preparations
1
Install the printer.
Assemble the stand and install the printer
referring to the Printer Stand Setup Guide
included with the stand.
3
Three people should hold the printer's carrying handles and place the printer on a table or
other fl at location.
• The iPF760/iPF765 weighs approximately
52 kg by itself. Moving the printer requires
Caution
at least three people. Be careful to avoid
back strain and other injuries.
5
Move the printer to the location where you
will use it.
• When moving the stand, lift the support rod
to the position (a) before closing the output
Caution
stacker and unlocking the 4 casters. Failure
to do so may lead to scratched fl ooring,
damage to the basket cloth, and injury.
O F F

Install the Ink Tanks

1
Press the power button to turn on the
printer.
Prepare the printer for use by installing the printer and connecting the power cord.
• When moving the printer, fi rmly grasp the
carrying handles. Holding the printer at
other positions is dangerous, and may
cause injury and damage if the printer is
dropped.
• After you have moved the stand, be sure to
lock the 4 casters.
a
O N
Load all six ink tanks .
2
When the following screen appears, use
the ▲ and ▼ keys to select a language
and press OK.
2
2
4
6
3
Select your local time zone and press OK.
Language
English
Français
Data
Italiano
Deutsch
Message
Remove the packing materials from the
top of the printer.
Remove the orange tape used to secure
the roll holder to the printer.
Plug the power cord into the power supply
connector on the right of the printer and
plug the other end into the outlet.
Time Zone
0:London (GMT)
+1:Paris,Rome
+2:Athens,Cairo
Data
+3:Moscow
+4:Eerevan,Baku
Message
Power
Load FEED Cut
Menu
Stop
Navigate
Back