Ink Does Not Come Out/Printing Is Blurred/Colors Are Wrong/White Streaks/Straight Lines Are Misaligned/Cannot Print To End Of Job - Canon PIXMA MP150 User Manual

Ink Does Not Come Out/Printing Is Blurred/Colors
Are Wrong/White Streaks/Straight Lines Are
Misaligned/Cannot Print To End Of Job
Cause
FINE Cartridge is empty.
FINE Cartridge is not installed
correctly.
Incorrect paper type.
FINE Cartridge nozzles clogged or
shifted.
Print Quality is not set properly.
Media not loaded printside up.
The paper stack exceeds the
capacity of the Auto Sheet Feeder.
90
Troubleshooting
Replace the FINE Cartridge, and close the Scanning Unit.
If printing is not finished yet, just press [OK] on the machine to continue
printing in the "no ink" state. Replace the FINE Cartridge with a new one
as soon as possible after printing has finished. The machine may be
damaged if printing is continued under the ink out condition. See
"Replacing A FINE Cartridge" on page 68.
Open the Scanning Unit and make sure that the correct FINE Cartridge is
inserted in each position. See "Replacing A FINE Cartridge" on page 68.
When printing directly from a digital camera, on the Operation Panel,
confirm that the <MEDIA TYPE> selected matches the paper loaded.
When printing from a computer, check the following.
On the [Main] tab of the printer driver, ensure that the [Media Type]
selected matches the paper loaded.
In the Print dialog box of the printer driver, select [Quality & Media] from
the pop-up menu, and then ensure that the [Media Type] selected matches
the paper loaded.
Print the nozzle check pattern to check for uneven ink output.
See "Printing The Nozzle Check Pattern" on page 77.
ink supply is uneven.
See "FINE Cartridge Cleaning" on page 79.
See "FINE Cartridge Deep Cleaning" on page 79.
If straight lines are shifted.
See "Aligning The FINE Cartridge" on page 80.
Be sure to set the [Print Quality] setting to [High] in Windows, or [Fine] in
Macintosh.
1. Open the printer properties dialog box.
2. On the [Main] tab, click [High] for the [Print Quality] setting.
When you cannot choose the [High] setting or when the print quality does
not improve, select [Custom], click [Set] and then adjust the [Quality bar]
for higher print quality.
1. Open the [Print] dialog box.
2. Select [Quality & Media] from the pop-up menu and then click [Detailed
Setting].
3. Drag the [Print Quality] slide bar to the [Fine] end.
Check that your paper is loaded with the correct print side facing up.
If the paper stack exceeds the Load Limit Mark, or exceeds the capacity of
the Auto Sheet Feeder, reduce the amount of paper. See "Recommended
Paper" on page 17.
Action
Chapter 10