Canon PIXMA MP150 User Manual page 60

Scanning With The Operation Panel Of The Machine
With the operation panel of the machine, you can open the MP Navigator and change the
settings for the scanning operations. (See the Scan Guide)
If you are using Windows XP
The program selection screen is displayed the first time you press [Black] / [Color] (MP170) or
[SCAN] (MP150) on the machine. Specify [MP Navigator 2.0] as the application software to use,
check [Always use this program for this action], then click [OK]. From the next time, MP
Navigator is automatically started.
When using Mac OS X
For the machine to start scanning when [Black] / [Color] (MP170) or [SCAN] (MP150) is pressed,
you need to set MP Navigator as the starting application software in Image Capture under
[Applications] of Mac OS X.
Important
If you are using Macintosh OS X v.10.3.x
Select [Applications] from the [Go] menu, then double click [Image Capture]. Click [Options] at
lower left of the scanner window, select [MP Navigator 2.0] from [Application to launch when
scanner button is pressed], then click [OK].
Important
If you are using Macintosh OS X v.10.2.x
Select [Applications] from the [Go] menu, then double click [Image Capture]. Select
[Preferences] from the [Image Capture] menu. Select [Others] from [When a scanner button is
pressed, open], select [MP Navigator 2.0] from [Applications], then click [Open].
1
Load the document on the Platen Glass. (See page 15)
2
Press [SCAN].
The machine switches to Scan Mode.
3
Press [Black] or [Color].
The MP Navigator opens.
1
Load the document on the Platen Glass. (See page 15)
2
Press [SCAN].
The MP Navigator opens.
Note
58
Scanning Images
Make sure that the MP Navigator is installed and that the Macintosh is
connected to the machine before starting up Image Capture.
If you select [Preferences] from the [Image Capture] menu, click
[Scanner], and mark [Use TWAIN software whenever possible], [Options]
is not displayed. In this case, click [Use TWAIN software whenever
possible] to uncheck the option, exit the Image Capture, then start it
again.
The subsequent procedure varies depending on your settings.
For details, see the Scan Guide.
Chapter 6