Setting Documents
Document Requirements
The documents you load on the Platen Glass for copying or scanning must meet these
requirements:
Document
Type
Size (W x L)
Thickness
Loading Documents
To copy or scan a document, set it on the Platen Glass.
Make sure any glue, ink, or correction fluid on the document is completely dry before loading.
1
Lift the Document Cover.
2
Load your document.
Place your document face down on the Platen Glass.
Align the upper left corner of your document with the alignment mark on the lower right
corner of the Platen Glass.
Note
3
Gently close the Document Cover.
Note
Chapter 1
All types of paper documents
Photographs
Books, catalogs or magazines
1
3
Max. 8
/
in. x 11
/
in. (216 mm x 297 mm)
2
4
3
Max.
/
in. (20 mm)
4
The machine cannot scan the area within approximately 1/25 in. (1 mm)
of the front and right edges of the Platen Glass.
Thick documents (Max. 3/4 in./20 mm), such as books, can also be
scanned.
Before Printing
15