Load Setup Defaults - SOLTEK SL-54A2 Manual

Used MEM Choose 8K, 16K, 32K, or 64K.
Length*
With the above two functions, users
can define where the used memory
address is located and its
corresponding length of the legacy
area. BIOS will skip the UMB area
which is used by the legacy device
to avoid memory space conflict.
* This function actives only when
the ÒUsed MEM Base AddrÓ is
chosen.
3. Press <ESC> and follow the screen instructions to save or
disregard your settings.

Load Setup Defaults

Load Setup Defaults option loads the default system values
to the system configuration fields. If the CMOS is corrupted
the defaults are loaded automatically. Choose this option
and the following message appears:
"Load Setup Defaults (Y/N)? N"
To use the Setup defaults, change the prompt to ÒYÓ and
press <Enter>.
40