Load Setup Defaults - SOLTEK SL-54A2-S Manual

Reset Configuration
Data
IRQ-x assigned to
DMA-x assigned to
PCI IRQ Actived By
PCI IDE IRQ Map To Select PCI-AUTO (default), ISA, or
Primary/ IDE INT#
Secondary IDE INT# Choose A, B (default), C, or D.
Used MEM Base
Addr
3. Press <ESC> and follow the screen instructions to save or
disregard your settings.

Load Setup Defaults

Load Setup Defaults option loads the default system values
to the system configuration fields. If the CMOS is corrupted
the defaults are loaded automatically. Choose this option
and the following message appears:
"Load Setup Defaults (Y/N)? N"
To use the Setup defaults, change the prompt to ÒYÓ and
press <Enter>.
Choose Enabled or Disabled
(default). Disabled means to retain
PnP configuration data in BIOS and
Enabled means to reset PnP
configuration data in BIOS.
Legacy ISA: Manually assigns
IRQ/DMA to device.
PCI/ISA PnP: BIOS assigns
IRQ/DMA to device automatically.
Choose Edge or Level (default).
Most PCI trigger signals are Level.
assign a PCI SLOT number
(depending on which slot the PCI
IDE is inserted). If PCI-AUTO does
not work, then assign an individual
PCI SLOT number.
Choose A (default), B, C, or D.
Choose N/A (default) or ISA legacy
card requests to have memory start
address.
Award BIOS Setup 39