Item 12. C8 Mode ⋅⋅ E2Rom Data Readout - ISHIDA IWB Series Service Manual

Item 12. C8 Mode ⋅⋅ E2ROM Data Readout
Addresses 000 ∼ 127 can be read out in this mode.
1. Test Mode start-up
Press the [Display ON/OFF] key ON.
Keep pressing the [ZERO(+)] key while the all segments
are lighting.
2. Press the [ZERO(+)] key ON for seven times, or the
[TARE(−)] key ON for twice.
3. Press the [SET] key ON.
To change address,
press; the [ZERO(+)] key for a increment (plus direction),
or
the [TARE(−)] key for a decreasing increment (minus
direction).
Address 000
Address 110
Address 127
4. Press the COLUMN key ON to return to the Test Mode.
E2ROM Data
Address
0∼99 Preset data (10 items)
⋅ Upper limit value
⋅ Lower limit value
⋅ Tare weight (A range)
⋅ Tare weight (B range)/unit weight
⋅ Checksum
100A Scale Mode data Weighing capacity (bit 1)
100B Reserve
101 Check data on 100A, 100B (writing twice)
Manual No. 0158A
Operation
TARE key
C8 starting address
ZERO key
Data Contents
1b Mode (bit 2)
Counting (bit 3)
26/68
(Address in 3 digits) –Data in 1 byte
Data Range
0∼60000
17 bits
17 bits
18 bits
20 bits.
8 bits
0∼F
―
―
IWB − IWX Series (Overseas Use) Service Manual
Display
Remark (default)
Set data in the
Registration Mode
(Operation Manual)
10 bytes x 10 data
Reference
Reference
Refer to the IWB/IBX
Operation Manual.