Care, Maintenance And Service; Care - Zeiss Floor Stand S Operating Manual

ZEISS
6

CARE, MAINTENANCE AND SERVICE

6.1

Care

Care of Floor Stand S is limited to the following procedures:
The devices are not equipped with special devices to protect against corrosive, potentially
infectious, toxic, radioactive or other substances that may be hazardous to health. All legal
regulations must be observed when handling such substances, particularly the relevant
national accident prevention regulations.
Eliminate contaminations on Floor Stand S according to the rules for prevention of accidents.
The installed accessories must be disconnected from the mains supply before cleaning. Make
sure that no cleaning fluids are allowed to penetrate to the inside of the device.
Never expose the device to adverse climatic conditions (extreme humidity and temperature)
for longer periods. Maximum humidity 75 %.
•
Preferably wipe all mechanical surfaces of the equipment with a damp cloth only.
•
Remove persistant contaminations with a mixture of equal volumes of alcohol and distilled water to
which a drop of a mild, commercial detergent (e.g. washing-up liquid) has been added.
•
Never use agressive or abrasive cleaning products (such as scouring agents, scrubbing sponges,
solvents).
•
Labels on the components may only be cleaned using a dry cotton cloth.
22
CARE, MAINTENANCE AND SERVICE
Care
435413-7144-010
Floor Stand S
01/2017