Table of Contents
Advertisement
i
Sew trial stitches and confirm that the
settings are as desired.
Pressing down on the main foot controller increases
the sewing speed; releasing the pressure on the main
foot controller decreases the sewing speed.
Release the main foot controller or side pedal to stop
sewing.
Memo
• The speed that is set using the sewing speed
controller will be the main foot controller's
maximum sewing speed.
• When the multi-function foot controller is
connected, the "Start/Stop" button cannot be
used to start sewing.
■ Adjusting the Length of the Cord for
the Main Foot Controller
a
Unwind the cord for the main foot
controller.
b
Guide the cord between the tabs.
c
Wind the cord until it is the desired length.
*
The cord can be wound either clockwise or
counterclockwise.
d
Pass the cord between the tabs.
Note
• In order to avoid stepping on the cord with the
main foot controller, pass the cord between
the tabs.
Memo
• When storing the cord, pass it between the
tabs, and then insert the plug into the jack on
the main foot controller.
Using Advanced Monogramming
Foot "N+"
This presser foot can be used in the same way as
monogramming foot "N". We recommend using
advanced monogramming foot "N+" when sewing
fabric that is hard to feed, such as leather and
vinyl.
N+
Note
• Sew test stitches on the fabric before sewing
your project.
• If character/decorative stitch patterns
become misaligned, make adjustments to the
pattern settings. For details on making pattern
adjustments, refer to "Making Adjustments" in
the Operation Manual (Sewing).
INCLUDED ACCESSORIES
4
Advertisement
Table of Contents
