Scanning Documents - Canon imageFORMULA DR-2050SP User Manual

Scanning Documents

1.
Place your document into the
scanner.
For more information on the types of
documents that can be scanned, and
about placing your documents, see the
DR-2050C/DR-2050SP User's Guide.
2.
Press the SCAN button on the
scanner or the FORWARD key of the
remote control.
The scanner begins to scan the document
and the first page of the scanned
document is displayed on the screen. If
the document consists of more than one
page, the scanner continues to scan the
pages and saves them in the internal memory (main memory). This is the
"prescan" function.
Note
• You can adjust the brightness of the displayed image. (See "Brightness
Adjustment," on p. 26.)
• While there are documents on the feed tray, the documents are automatically
prescanned until the memory is full.
• The scanner's internal memory can store up to 40 pages (including the
displayed image). When you scan another page while the memory holds
maximum 40 pages, the first scanned page is deleted from the memory.
• You can check the number of scanned documents in the thumbnails view.
• If the menu tool bar is not displayed, the OK key has the same function as
the FORWARD key.
3.
Press the SCAN button on the scanner or the FORWARD key of the
remote control.
The next image saved in the main memory is displayed. If any documents
remain in the scanner at this time, they are then scanned into the memory.
When you scan another page while the memory holds maximum 40 pages, the
first scanned page is deleted from the memory.
22
Using the Scanner
Face the top of
the document
downward.
Back
side
FORWARD
SCAN button
key