Scanner Power; Turning The Scanner On - Canon imageFORMULA DR-2050SP User Manual

Scanner Power

Turning the Scanner ON

1.
Turn the liquid crystal projector's power on and project an image onto
the screen.
2.
Slide the scanner's power switch to the right ("I" side).
3.
The initial screen appears on the screen.
The size of the initial screen differs according to the resolution setting. (See
"Projector Type," on p. 35.)
IMPORTANT
Internal initialization is executed while the initial screen is displayed.
Do not attempt to operate the machine during this time. Initialization
usually takes approximately 20 seconds, but may take up to 2 minutes.
4.
The opening screen switches to the message screen.
IMPORTANT
When the power is turned ON, the initial
screen is displayed while the scanner
detects the connection. Make sure to turn
the projector's power ON first before

turning the scanner ON.

Setting up the Scanner
19