Remote Control; Inserting The Batteries; Using The Remote Control - Canon imageFORMULA DR-2050SP User Manual

Remote Control

Inserting the Batteries

Before using the remote control, insert the 2 type AAA dry cell batteries
included with the remote control.
1.
Remove the battery cover of the remote control.
2.
Insert the 2 type AAA dry cell batteries so that the (+) and (-) marks on
the batteries are aligned with the corresponding (+) and (-) marks in the
battery compartment of the remote control.
3.
Replace the battery cover in its original position.
IMPORTANT
• The remote control ceases to function properly when the batteries become
weak. When this happens, replace the batteries and dispose of the old
batteries in compliance with local regulations.
• Remove the batteries from the remote control if you do not plan to use it for
an extended period of time.
• When replacing the batteries, replace them with a pair of new batteries. Do
not use a different type of batteries or combination of different types of
batteries.
• Do not use nickel-cadmium batteries or hydrogen batteries.

Using the Remote Control

Point the infrared transmitter
of the remote control toward
the infrared sensor of the
scanner to operate it. The
remote control is effective
within approximately 16.4
feet (5 meters).
Sensor
Reception
range
Sensor
Setting up the Scanner
17