Using The Usb Memory; Reading Images From A Usb Memory Device - Canon imageFORMULA DR-2050SP User Manual

Using the USB Memory

Reading Images from a USB Memory Device

1.
Connect the USB memory device to the
scanner.
A message is displayed telling you that the USB
memory device has been connected.
2.
Select Yes and press OK on the remote
control.
3.
Select the folder containing the image that you
want to display using the remote control.
The images in the folder are displayed as thumbnail
images.
Folder Display screen
• The menu toolbar is not displayed.
• Pressing the FORWARD/REVERSE key on the
remote control or the SCAN/STOP button on the
scanner displays the next or previous image
respectively, in the selected folder.
• Up to 40 folders can be recognized.
• If an image in the folder cannot be displayed,
is displayed.
4.
Select the image that you want to display.
Note
• You can connect a USB 2.0 or USB 1.1 memory device.
• When a USB memory device is connected, the memory mode can be toggled
between the Main Memory mode and the USB Memory mode by pressing
the MODE key on the remote control. All of the images stored in the main
memory are deleted at this time.
• When you want to switch to the Main Memory mode from the USB Memory
mode, press the MODE key on the remote control or select the [Mode]
switch on the Menu toolbar. When you switch to the Main Memory mode, a
message "Switch to Main Memory mode" appears.
28
Using the Scanner
Folder display
(USB memory mode)
Thumbnail display
(USB memory mode)