❑ Move the focus to the desired fold
type © press
(Confirm)
If you want to use voice recognition,
press the Voice Recognition button ©
say the desired fold type © say "ok."
G If you want to offset the output:
❑ Move the focus to [Offset] © press
(Select).
If you want to use voice recognition,
press the Voice Recognition button ©
say "offset."
NOTE
The procedure for specifying the number
of copies to offset is not supported by the
Voice Navigation mode.
G If you want to rotate the output:
❑ Move the focus to [Rotate 90
Degrees] © press
If you want to use voice recognition,
press the Voice Recognition button ©
say "rotate 90 degrees."
1
(Select) © press
Basic Copy Settings 2-89
(Select).
2