Canon imageRUNNER ADVANCE 6055 User Manual page 166

NOTE
• To use the Staple mode, an optional
finisher must be attached to the main unit.
• The Face Up/Face Down mode enables
you to specify whether to output paper face
2
up or face down. Press [Face Up/Face
Down], and then select from the following:
- [Auto]: If you are copying a single page
- [Face Down (Normal)]: Printed sheets are
- [Face Up (Reverse)]: Printed sheets are
• [Face Up/Face Down] may not be available
depending on the model of the machine
you are using.
• If you set the Staple or Hole Punch mode,
the side of the paper that is printed on will
always be output face down.
2-84 Basic Copy Settings
original, copying on nonstandard size
paper, or other available paper that is
loaded in the multi-purpose tray, the
printed sheets are output face up.
Otherwise, the printed sheets are output
face down.
always output face down.
always output face up.
1