Canon imageRUNNER ADVANCE 6055 User Manual page 170

2
G If you want holes made in your
G If you want fold made in your output:
2-88 Basic Copy Settings
[Offset] appears only if an optional
finisher is attached.
[Rotate 90 Degrees] appears only if an
optional finisher is not attached.
output:
❑ Move the focus to [Hole Punch] and
press
If you want to use voice recognition,
press the Voice Recognition button ©
say "hole punch."
NOTE
You may be able to select the type of
holes to punch, depending on your
location or the optional equipment
attached to the machine.
❑ Move the focus to [Fold] © press 5
(Select).
If you want to use voice recognition,
press the voice Recognition button ©
say "fold."
1
(Select).