Mode Name
Hole
Punch
Finishing
*1
Rotate 90
Degrees
Face Up/
Face Down
*1 The Staple and Offset finishing modes can
be set only if an optional finisher is attached.
*5 The Hole Punch mode can be set only if an
optional puncher unit is attached to an
optional finisher or booklet finisher.
*6 [Rotate 90 Degrees] can only be selected if
the machine is not equipped with an optional
finisher.
1
The machine punches two
or three holes (depending
*5
on the paper size) into the
copies.
The copies are automatically
collated into sets arranged in
*6
page order, and are output in
alternating directions.
Specify whether the printed
sheets are output as face up
or face down.
Copy Mode Summary
Summary
5
5-7