G If you want holes made in your
3
G If you want fold made in your output:
G If you want to offset the output:
3-44
Basic Copy Settings
output:
❑ Press the Voice Recognition button ©
say "hole punch."
NOTE
You may be able to select the type of
holes to punch, depending on your
location or the optional equipment
attached to the machine.
❑ Press the voice Recognition button ©
say "fold."
❑ Press the Voice Recognition button ©
say the desired fold type © say "ok."
❑ Press the Voice Recognition button ©
say "offset."
NOTE
The procedure for specifying the number
of copies to offset is not supported by the
Voice Navigation mode.
1