Auto (Color/Black) - Canon imageRUNNER ADVANCE 6055 User Manual

I Auto (Color/Black)
If the Auto(Color/Black) mode is selected,
the machine automatically recognizes
whether the original is in color or
black-and-white. Color originals are copied
in the Full Color mode, while
black-and-white originals are copied in the
Black mode.
IMPORTANT
When the Auto(Color/Black) mode is set
and your originals contain color sections,
the machine copies them in the Full Color
mode. However, the machine may copy
color originals in the Black mode under the
following conditions. To avoid this, set the
color mode to 'Full Color'.
- If the originals contain few color sections
- If the color sections are located only on
the left side (within 3/8" (10 mm) from the
left edge) or the right side (within 5/8" (17
mm) from the right edge) of the originals
when placing the originals in the feeder
- If the originals contain light color densities
- If the color sections of the originals are
close to black
1
Basic Copy Settings 2-71
2