Table of Contents
Advertisement
2 INSTALLING THE HEADSET ON YOUR HELMET
15. After aligning the cables, attach the speaker (R) connector and the
cables with adhesive tape on the last cavity located at the rear of the
helmet.
Note: Do not cover the snap fastener with the aligned cables. Make
sure the aligned cables are placed above the snap fastener.
16. Reattach the center pad, cheek pads, and ear pads starting from the
rear and click the snap fasteners.
Cheek Pad (R)
Ear Pad (R)
2.2 External Mesh Intercom Antenna
Pull the Mesh Intercom Antenna inwards
slightly to unfold it.
SRL-EXT Motorcycle Mesh & Bluetooth
Last Cavity
Center Pad
Communication System for Shoei Helmets | 17
®
Cheek Pad (L)
Ear Pad (L)
1
2
Advertisement
Table of Contents
