Sena SRL-EXT User Manual page 15

2 INSTALLING THE HEADSET ON YOUR HELMET
8. Clean the area on the right side of your helmet where you will attach
the double sided adhesive tapes with moistened towel and dry
thoroughly.
9. Peel off the double sided adhesive tapes to the back of the battery.
10. Place the battery cable so that it meets the end of the lettering as
shown in the illustration. Then, attach the battery to the right side of
the helmet with double-sided adhesive tape.
Note: Make sure that the main unit is firmly attached to the helmet.
Maximum adhesion occurs after 24 hours.
11. Align the battery cable with the concave portion on the inner
padding of the helmet. Then, attach the battery cable to the inside
of the helmet with adhesive tape.
Meet each other
2
SRL-EXT Motorcycle Mesh & Bluetooth
1
Concave
Portion
Communication System for Shoei Helmets | 15
®