Turning The Machine On And Off - Canon PIXMA MP970 Series Quick Start Manual

Turning the Machine On and Off

Turn on the machine before printing.
Turning on the Machine
Before turning on the machine, confirm the following.
The Print Head and ink tanks are installed into place.
If you are using the machine connected to a computer, confirm also the following.
The machine is connected to your computer (or a compatible device).
The MP Drivers are installed.
Note
If preparatory operations above are not complete, follow your setup sheet and/or the Network
Setup Guide to complete them.
1
Open the Operation Panel and press the ON/
OFF button to turn on the machine.
The Power lamp flashes and then remains lit blue.
Important
If the Alarm lamp lights up or flashes orange and an
error message is displayed on the LCD, see "An Error
Message Is Displayed on the LCD" on page 74.
2
If you are using the machine connected to a
computer, turn on your computer.
Turning off the Machine
1
To turn off the machine, press the ON/OFF
button.
When the Power lamp stops flashing, the machine
is turned off.
Important
About the Power Plug
When removing the power plug after turing off the
machine, be sure to confirm that the Power lamp is
not lit. If the power plug is removed from the wall outlet
with the Power lamp still lit or flashing blue, the
machine may become unable to print.
See "Keeping the Best Printing Results" on page 55.
Before Using the Machine 5