Canon PIXMA MP970 Series Quick Start Manual page 58

5
Install the ink tank.
(1) Insert the front end of the ink tank into the Print
Head.
(G) Make sure the position of the tank matches
the label.
(2) Press on the
ink tank snaps firmly into place.
(3) Make sure that the ink lamp lights up red.
Important
Install all the ink tanks to print. The machine cannot be
used unless all the ink tanks are installed.
6
Gently close the Scanning Unit (Printer Cover).
Caution
Be sure to hold the Scanning Unit (Printer Cover) firmly using both hands, and be careful not to
get your fingers caught.
Do not hold the LCD or the Operation Panel.
Note
If the error message is still displayed after the Scanning Unit (Printer Cover) is closed, see "An
Error Message Is Displayed on the LCD" on page 74.
When you start printing after replacing the ink tank, Print Head Cleaning is performed
automatically. Do not perform any other operations until Print Head Cleaning finishes. Wait until
you cannot hear the operation noise.
54 Routine Maintenance
mark on the ink tank until the
(G)
(1)
(3) (2)