8.2.2 Removing indoor unit electrical box
!
DANGER
• Disconnect the unit from the power supply before touching any of the parts in order to
avoid an electrical shock.
• Do not touch the switch for DHW tank heater operation when handling the electrical box.
Keep the position of this switch in factory setting position ("Automatic" operation).
◆ Remove the electrical box cover
1 Remove the indoor unit service cover as explained above.
2 Unscrew the 2 front screws of the electrical box cover and then, rotate it.
PMML0600 rev.0 - 06/2022
Switch
Indicative label
(SW1)
8
113