Hitachi YUTAKI M R32 Series Installation & Operation Manual page 79

◆ Auxiliary boiler or heater (Default for Output 3)
The auxiliary boiler or heater can be used when the heat pump cannot achieve the require
temperature by itself.
◆ Solar (Default for output 4)
This output is used when solar mode is enabled (from Unit controller) and the temperature in
the solar panel rises above the water temperature in the domestic hot water tank (DHWT). The
connection between terminals 39 and 40 shall be closed in order to activate the dedicated water
pump for solar panel combination.
PMML0600 rev.0 - 06/2022
37 38
Auxiliary Heat
(Output 3)
39 40
Solar
(Output 4)
6
79