Table of Contents
Advertisement
Coin Preparation
Before loading coins into the machine inspect and remove all foreign objects. Also sort off
damaged, lubricated or sticking coins.
Insert the coin guides on the tray.
a)
Make sure the support rod of the tray is vertical aligned.
b)
Operation
Before counting make always sure the desired coin denomination is selected on BOTH dials.
Counting
Press "On/Off" key to start the count or push the coin exit to activate the Quick-change switch. The CMX01
shows the counted quantity or value. When the count is finished the CMX01 stops automatically. (You can also
press "On/Off" or push again the coin exit to stop the count manually).
Piece counting
B1
Count
Total
# 1 B
1000
0
1
#
It is now possible to RM: Print the count M: Save the count into the memory, C: clear the count and bag
content. C (long): Clear the count memory of this denomination on/Off: Count more coins The CMX01 stops
with "B1 Stop" if the pre-selected stop is reached. The count will automatically transfer to the memory and the
bag content counter will set to zero. Replace the bag with an empty one.
Note: Value or piece counting is selectable in Setting menu, option "Counting mode"
Select Denomination
Adjust both the thickness and diameter knobs to the desired coin denomination and attach an
Value counting
10:45
B1
100
Value
0
Total
100
#
B
2
0
?
2.00
or
CUMMINS ALLISON, A CPI BRAND 3350 Ridgeway Drive, Unit 3, Mississauga, Ontario L5L 5Z9
CMX02 – Coin Counter User Guide
10:45
200.00
0.00
1000
100
1
2
?
www.cranepi.com Tel: 1-800-499-6191
9
Advertisement
Table of Contents
