Table of Contents
Advertisement
empty coin bag on the counting exit.
Press the "0" key several times until the requested denomination / coin number appears.
If the count or bag content were not zero, there will be a warning message: "Are you sure you want
to proceed". If you press "1" (Yes) the two counters will automatically be cleared. With "2" (No) the
coin number will not change.
After the last coin number "9" a total symbol "Σ" appears. It represents the sum of all saved counts
and cannot be used for counting.
Memory
Add Memory
The CMX02 adds automatically full bags to the memory. When a count is finished and a bag stop is
not reached, it is possible to accumulate the count to the memory by pressing "M". After pressing
"M" the Count/ Value is reset to "0".
B1
Count
Total
# 1 B
1000
0
1
#
1.1.1
Show Memory
Press the "0" key several times until the total symbol "Σ" appears. Here you can see the sum of all
saved counts.
Count
Total
Press
RM:
Print the total C (long): Clear all totals
0:
Select a denomination
Note: Uncomplete counts that are not saved with "M" are not in the memory.
Bag Stop
The CMX02 has three stop levels. The active stop level type is defined in the "Settings" menu.
Batch 1: Individual stop number for every denomination
10:45
B1
100
Count
1000
Total
100
# 1 B
→ "M" →
2
0
?
21400
CUMMINS ALLISON, A CPI BRAND 3350 Ridgeway Drive, Unit 3, Mississauga, Ontario L5L 5Z9
10:45
1100
100
1000
1
2
?
#
CMX02 – Coin Counter User Guide
0
www.cranepi.com Tel: 1-800-499-6191
10
Advertisement
Table of Contents
