Setting The Coin Size; Manual Adjustment For Token Counting - CUMMINS ALLISON cashMAX CMX02 User Manual

CMX02 – Coin Counter User Guide

Setting the Coin Size

Before you start counting, ensure to set both the thickness and diameter dials to the correct
denomination you are going to count. For alternate denominations or tokens, see Manual Adjustment
for token counting.
Note: Smaller coins will be rejected but larger coins stay in the machine and may cause jams.
Diameter adjuster Thickness adjuster

Manual Adjustment for Token Counting

Thickness
Open the right top cover. Turn the Thickness adjuster to maximum. Place the token under the thickness
block and turn the adjuster slowly down until it gently touches the token. Turn the adjuster backward
until the token moves freely, without resistance, between disc and thickness block.
Thickness Thickness Diameter Diameter
Diameter
Lift up the transport belt. Turn the Diameter adjuster to maximum. Place the token on the transport track and
turn the adjuster slowly narrow until it gently touches the token. Turn the adjuster backward until the token
moves freely and has side clearance of about 0.4 mm.
8
CUMMINS ALLISON, A CPI BRAND 3350 Ridgeway Drive, Unit 3, Mississauga, Ontario L5L 5Z9
www.cranepi.com Tel: 1-800-499-6191