Memory Default; Eeprom Error; Pjs Error Messages - CUMMINS ALLISON JetSort 1000 Series Operating Instructions Manual

SECTION 4 JETSORT 1000 Series ERROR MESSAGES
1.

Memory Default:

Indicates JetSort has cleared all memory registers (except PJS registers 01, 02 and 03)
and has returned to factory defaults. This condition can be induced by holding down the
red STOP key while turning on the JetSort.
2.

EEPROM ERROR:

Indicates JetSort has experienced a memory loss on start up. This may affect memory
conditions and may result in loss of user defaults. Contact your Local Cummins office for
additional information.
3.

PJS Error Messages:

Error: Entry below min!
The stop limit entered for a particular coin denomination is lower than the minimum of ten
(10). Enter a stop limit of 10 or more. Advanced model only.
Error: Uneven multiple!
The stop limit entered for a particular coin denomination is an uneven multiple of the coin
denomination. Example: $100.25 stop limit for quarters. Enter a stop limit that is an
even multiple of coin denomination. Advanced model only.
Error: Entry below bag!
The stop limit entered for a particular coin denomination is at or below the current bag
count. The JetSort will not accept such limits. Enter a stop limit above the current bag
count or clear all day totals and re-enter stop limit. Advanced model only.
Error: No such file!
The PJS file number requested through the PJS GET feature, has not been previously
recorded. GET a different PJS file or enter stop limits for new PJS file. Advanced model
only.
Limit (1¢, 5¢, 10¢, 25¢, 50¢, $1)
JetSort has reached the denomination stop limit for a particular coin denomination.
Clear bag or re-set stop limit to resume processing. Advanced model only.
Warning: Exists, Replace?
The file number entered for a new PJS file has been previously used. Enter a different
PJS file number or overwrite previously recorded PJS file by pressing the ENTER key.
Advanced model only.
Rev. D Page 36 Form # 022-7240-00