Table of Contents
Advertisement
4.10.8.6
Setting Time Offset
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Time & Date → Set → Time Offset.
3 Enter time offset using Navigation keys.
NOTICE: You can adjust the offset value, with 15 minute steps, up to 14 hours ahead or
behind.
4 Press Done.
4.10.8.7
Setting Automatic Updates for the Time and Date
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Time & Date → System Update.
3 Select one of the following:
•
Off – All the infrastructure information are ignored. The radio uses internal time and offset.
•
Time Only – Time displayed is calculated from the offset programmed by your service
DRAFT
provider added or subtracted from the infrastructure time.
•
Time & Offset – Time and offset are updated after receiving from the infrastructure.
4.10.9
Energy Economy
Energy Economy (EE) is a mode of operation to save battery life. Your radio does not monitor all
downlink time slots of the Main Control Channel. If the radio is in the charger, Energy Economy mode
is not needed.
4.10.9.1
Enabling or Disabling Energy Economy
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Energy Economy → EE Selection.
3 Select one of the following:
•
On – Activates Energy Economy feature.
•
Off – Deactivates Energy Economy feature.
4.10.9.2
Viewing the Energy Economy Status
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Energy Economy → EE Status.
MN002041A01-AG (en-US)
Main Menu
111
Advertisement
Table of Contents
