Alarm; Alarm Setting - EverFocus EPN5230 User Manual

7.4.

Alarm

You can configure alarm related settings such as Alarm Period, alarm notification type, I/O Alarm and
Motion Detection on this page. Click the tab of the one you want to see.

7.4.1. Alarm Setting

You can configure the snapshot / record transmitting to the e-mail address or the FTP server using this
page.
Record Time: Enter the alarm video record time, from 10 to 30 seconds.
Snapshot: Select the snapshot number and frequency (from 1 to 10 second(s)). For example, if you set
up the snapshot number to 3 and frequency to 5, system will take a snapshot every 5 seconds and take
total 3 snapshots.
Note: The Record setting is only valid for alarm transm
transmitting to
both e-mail and FTP.
itting to
FTP; the Snapshot setting is valid for
51
EPN5230 / EPN5210
alarm