Configuring The Scanner Settings; Administrator Settings - Canon imageFORMULA ScanFront 220 Instructions Manual

3.

Configuring the Scanner Settings

The scanner setup consists of configuring the initial network settings from the [Administrator setting] screen, and then configuring
the settings needed to use the scanner as described in
❏ Administrator Settings
The following items are available for administrator settings. For details,
Hint
Except for the scanner maintenance items (roller counter reset, touch panel adjustment, and initialization), the administrator setting items
can be configured from the Web Menu (Administrator Mode). For details,
Menu (Administrator Mode)".
Setting Item
Set the Device Name and IP Address needed to
Network settings
connect to the network.
Change administrator Set the password required for logging in to
password [Administrator setting] and the Web Menu.
Backup / Restore all
Back up or restore the scanner settings.
settings
Login type setting Select the login screen for users.
Roller Counter Reset Reset the counter after replacing the feed roller.
Use to delete all of the current settings, such as
Format ScanFront 220 when changing the operating environment of the
scanner.
Adjust the touch panel when it does not operate as
Touch panel adjustment
expected.
Display language setting Set the language displayed on the touch panel.
Chapter 4 "Web Menu (Administrator
see "Configuring Administrator Settings" on p.
see "Web Menu (Administrator Mode)" on p. 3-6
Description
3-5
Chapter 3 ScanFront Setup
Mode)".
Web Menu
Administrator setting
(Administrator Mode)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
3-8.
or Chapter 4 "Web
Yes
Yes
Yes
Yes
No
No
No
Yes