Flow Of Scanner Operations - Canon imageFORMULA ScanFront 220 Instructions Manual

1.

Flow of Scanner Operations

The procedure and screen transitions for the process from turning the scanner ON, to sending an image file are as follows. For
descriptions of the various settings, refer to the appropriate reference pages.
No user is registered
* When no user is registered and only
the Shared Address Book and Shared
Job Button are used
User Settings screen
(See p. 6-9.)
Password setting screen
(See p. 6-9.)
Fingerprint registration screen
(See p. 6-10.)
* The User Settings screen enables
setting a password for the user that
logged in, and registration for the
ScanFront 220P.
Scanning finishes (A document confirmation message appears)
The image is sent
without the address
being confirmed.
Send (The screen displayed after sending differs depending on the Delivery Options)
Home screen
Turn the power ON
(See p. 6-3.)
Users are registered (device/server authentication)
Login screen
(See p. 6-4.)
Home screen
(See p. 6-8.)
Address selection screen
(See p. 6-14.)
Scan/Delivery Options screen
(See p. 6-23.)
Scan (The process after scanning differs depending on the Delivery Options)
(See p. 6-29.)
(See p. 6-17.)
Send/Image Confirmation screen
(See p. 6-18.)
Address Confirmation screen
(See p. 6-18.)
(See p. 6-29.)
Job Button screen
6-2
Chapter 6 Operating Procedures
* Set the screen that appears after login in the user settings.
* When you use server authentication, the user that logged in
is registered automatically.
Job Button screen
(See p. 6-8.)
* Users restricted by [Use only Job
Buttons] in the function
restrictions cannot scan from the
Home screen.
Scanning starts immediately after a
job button is pressed.
The document and After scanning of the
image are not checked document ends, the image is
sent as is and the process
ends.
Login screen
* Delivery Options
settings are also applied
to job buttons.