Network Setting; Language/Timezone; Device Operation - Canon imageFORMULA ScanFront 220 Instructions Manual

❏ Network Setting
You can confirm the network settings configured under
[Administrator setting] on the scanner.

Network Setting

Confirm or change the network settings configured under
[Administrator setting] on the scanner.
IMPORTANT
• The device name can be a combination of letters (A-Z, a-z),
numbers (0-9), and hyphens (-) up to 15 characters long.
• The device name must begin with a letter. You cannot end the
device name with a hyphen.
• You must restart the scanner after changing the device name.
Security of Web Menu
Add a checkmark to always use SSL for communication
with the Web Menu.
Hint
If you add a checkmark for [Be sure to use SSL], [Login with
SSL] and [Do Not Use SSL] are no longer displayed in the login
screen for the Web menu.
❏ Language/Timezone
You can confirm or change the language and regional
settings that appear on the scanner.
Chapter 4 Web Menu (Administrator Mode)
Language on the device
Set the language displayed on the touch panel.
IMPORTANT
You must restart the scanner after changing the display
language setting.
Time Zone
Set the region in which the scanner will be used.
Enable daylight saving time
Select this check box to apply the Daylight Saving Time
for the specified region set in the Time Zone.
IMPORTANT
• If the correct time zone is not set, the time stamps that are
saved for the send time of e-mail messages, and for the saved
image files will be incorrect.
• When the daylight saving time mode is enabled, the correct
time may not be reflected. In this case, set the correct time.
❏ Device Operation
You can configure the operation conditions of the scanner.
4-25