Tyco DV-5A Manual page 16

Automatic water control valve, single interlock preaction, electric actuation, fire protection systems 1 1/2 to 8 inch (dn40 to dn200)
Hide thumbs Also See for DV-5A:
Table of Contents

Advertisement

TFP1421
Page 16 of 18
Limited
Warranty
For warranty terms and conditions, visit
www.tyco-fire.com.
Ordering
Procedure
The TYCO DV-5
Automatic Water
a
Control Valves may be ordered as
follows:
Pre-Assembled Valves
with Trim
DV-5
Valves with Galvanized Trim
A
and Butterfly Valve
Specify: Size (specify), DV-5
matic Water Control Valve, G x G con-
nections with assembled galvanized
Americas Single Interlock Preaction
Electric Actuation Trim, complete with
assembled Model BFV-300 Butterfly
Valve, P/N (specify):
Groove x Groove
1 1/2 in. (DN40) . . . . . . . . . . . . . . . . . 551011315
2 in. (DN50) . . . . . . . . . . . . . . . . . . . . 551011320
3 in. (DN80) . . . . . . . . . . . . . . . . . . . . 551011330
4 in. (DN100). . . . . . . . . . . . . . . . . . . . 551011340
6 in. (DN150). . . . . . . . . . . . . . . . . . . . 551011360
8 in. (DN200) . . . . . . . . . . . . . . . . . . . 551011380
Notes:
AMERICAS DV-5
Valve with Trim and
A
Butterfly Valve: Americas pressure
switches, P/N 52-287-1-124 solenoid valve,
and psi/kPa water pressure gauges are
provided.
This arrangement is available for EMEA
and APAC upon request. Contact your
local distributor.
AMERICAS
DV-5A Valves with Galvanized Trim
Specify: Size (specify), DV-5
matic Water Control Valve, (specify)
end connection with assembled gal-
vanized Americas Single Interlock
Preaction Electric Actuation Trim, P/N
(specify):
Groove x Groove
1 1/2 in. (DN40) . . . . . . . . . . . . . . . . . 550011315
2 in. (DN50) . . . . . . . . . . . . . . . . . . . . 550011320
3 in. (DN80) . . . . . . . . . . . . . . . . . . . . 550011330
4 in. (DN100). . . . . . . . . . . . . . . . . . . . 550011340
6 in. (DN150). . . . . . . . . . . . . . . . . . . . 550011360
8 in. (DN200) . . . . . . . . . . . . . . . . . . . 550011380
Flange x Flange ANSI
3 in. (DN80) . . . . . . . . . . . . . . . . . . . . 550021330
4 in. (DN100). . . . . . . . . . . . . . . . . . . . 550021340
6 in. (DN150). . . . . . . . . . . . . . . . . . . . 550021360
8 in. (DN200) . . . . . . . . . . . . . . . . . . . 550021380
Flange x Grove ANSI
3 in. (DN80) . . . . . . . . . . . . . . . . . . . . 550031330
4 in. (DN100). . . . . . . . . . . . . . . . . . . . 550031340
6 in. (DN150). . . . . . . . . . . . . . . . . . . . 550031360
8 in. (DN200) . . . . . . . . . . . . . . . . . . . 550031380
T x T NPT
1 1/2 in. (DN40) . . . . . . . . . . . . . . . . . 550061315
2 in. (DN50) . . . . . . . . . . . . . . . . . . . . 550061320
Separate DV-5
See Table A for flange drilling
specifications.
Specify: Size (specify), DV-5
matic Water Control Valve, (specify)
end connection, P/N (specify):
Groove x Groove
1 1/2 in. (DN40) . . . . . . . . . . . . . . . . . 530010015
2 in. (DN50) . . . . . . . . . . . . . . . . . . . . 530010020
3 in. (DN80) . . . . . . . . . . . . . . . . . . . . 530010030
4 in. (DN100). . . . . . . . . . . . . . . . . . . . 530010040
6 in. (DN150). . . . . . . . . . . . . . . . . . . . 530010060
8 in. (DN200) . . . . . . . . . . . . . . . . . . . 530010080
Flange x Flange ANSI
3 in. (DN80) . . . . . . . . . . . . . . . . . . . .530020030
4 in. (DN100). . . . . . . . . . . . . . . . . . . .530020040
6 in. (DN150). . . . . . . . . . . . . . . . . . . .530020060
8 in. (DN200) . . . . . . . . . . . . . . . . . . .530020080
Auto-
a
Flange x Grove ANSI
3 in. (DN80) . . . . . . . . . . . . . . . . . . . .530030030
4 in. (DN100). . . . . . . . . . . . . . . . . . . .530030040
6 in. (DN150). . . . . . . . . . . . . . . . . . . .530030060
8 in. (DN200) . . . . . . . . . . . . . . . . . . .530030080
T x T NPT
1 1/2 in. (DN40) . . . . . . . . . . . . . . . . . 530060015
2 in. (DN50) . . . . . . . . . . . . . . . . . . . .530060020
Notes:
Valves are typically provided with flange
drilling per ANSI B16.1 (Class 125) or ISO
(7005-2 PN16).
Upon request, valves can be provided with
flange drilling per JIS B 2210 or AS 2129. In
which case part numbers are not assigned.
DV-5
Valve Trim
A
Specify: Size (specify), finish (specify),
Electric Actuation Trim for DV-5
matic Water Control Valves used in
Single Interlock Preaction Fire Protec-
tion System, P/N (specify):
Galvanized
1 1/2 in. (DN40) . . . . . . . . . . . . . . . . . 540001320
2 in. (DN50) . . . . . . . . . . . . . . . . . . . . 540001320
3 in. (DN80) . . . . . . . . . . . . . . . . . . . . 540001330
4 in. (DN100). . . . . . . . . . . . . . . . . . . . 540001340
Auto-
a
6 in. (DN150). . . . . . . . . . . . . . . . . . . . 540001360
8 in. (DN200) . . . . . . . . . . . . . . . . . . . 540001380
Black
1 1/2 in. (DN40) . . . . . . . . . . . . . . . . . 542001320
2 in. (DN50) . . . . . . . . . . . . . . . . . . . . 542001320
3 in. (DN80) . . . . . . . . . . . . . . . . . . . . 542001330
4 in. (DN100). . . . . . . . . . . . . . . . . . . . 542001340
6 in. (DN150). . . . . . . . . . . . . . . . . . . . 542001360
8 in. (DN200) . . . . . . . . . . . . . . . . . . . 542001380
Note:
Pressure switches and/or solenoid valves
for electric actuation are separately
ordered.
Valves without Trim
A
Auto-
a
Auto-
a
EMEA
DV-5A Valves with Galvanized Trim
Specify: Size (specify), DV-5
matic Water Control Valve, (specify)
end connection with assembled galva-
nized EMEA Single Interlock Preaction
Electric Actuation Trim, P/N (specify):
Groove x Groove
1 1/2 in. (DN40) . . . . . . . . . . . . . . . . . 550111315
2 in. (DN50) . . . . . . . . . . . . . . . . . . . . 550111320
3 in. (DN80) . . . . . . . . . . . . . . . . . . . . 550111330
4 in. (DN100). . . . . . . . . . . . . . . . . . . . 550111340
6 in. (DN150). . . . . . . . . . . . . . . . . . . . 550111360
165,1 mm . . . . . . . . . . . . . . . . . . . . . . 550111366
8 in. (DN200) . . . . . . . . . . . . . . . . . . . 550111380
Flange x Flange ANSI
3 in. (DN80) . . . . . . . . . . . . . . . . . . . . 550121330
4 in. (DN100). . . . . . . . . . . . . . . . . . . . 550121340
6 in. (DN150). . . . . . . . . . . . . . . . . . . . 550121360
8 in. (DN200) . . . . . . . . . . . . . . . . . . . 550121380
Flange x Groove ANSI
3 in. (DN80) . . . . . . . . . . . . . . . . . . . . 550131330
4 in. (DN100). . . . . . . . . . . . . . . . . . . . 550131340
6 in. (DN150). . . . . . . . . . . . . . . . . . . . 550131360
8 in. (DN200) . . . . . . . . . . . . . . . . . . . 550131380
Flange x Flange ISO
3 in. (DN80) . . . . . . . . . . . . . . . . . . . . 550141330
4 in. (DN100). . . . . . . . . . . . . . . . . . . . 550141340
6 in. (DN150). . . . . . . . . . . . . . . . . . . . 550141360
8 in. (DN200) . . . . . . . . . . . . . . . . . . . 550141380
Flange x Groove ISO
3 in. (DN80) . . . . . . . . . . . . . . . . . . . . 550151330
4 in. (DN100). . . . . . . . . . . . . . . . . . . . 550151340
6 in. (DN150). . . . . . . . . . . . . . . . . . . . 550151360
8 in. (DN200) . . . . . . . . . . . . . . . . . . . 550151380
T x T ISO
1 1/2 in. (DN40) . . . . . . . . . . . . . . . . . 550171315
2 in. (DN50) . . . . . . . . . . . . . . . . . . . . 550171320
Notes:
Pressure switches, P/N 52-287-1-124
solenoid valve, bar/psi water pressure
gauges, and NPT to ISO threaded trim
adaptors for external connections are
provided.
Separate DV-5
Valves without Trim
A
See Table A for flange drilling
specifications.
Specify: Size (specify), DV-5
matic Water Control Valve, (specify)
end connection, P/N (specify):
Groove x Groove
1 1/2 in. (DN40) . . . . . . . . . . . . . . . . . 530010015
2 in. (DN50) . . . . . . . . . . . . . . . . . . . . 530010020
3 in. (DN80) . . . . . . . . . . . . . . . . . . . . 530010030
4 in. (DN100). . . . . . . . . . . . . . . . . . . . 530010040
6 in. (DN150). . . . . . . . . . . . . . . . . . . . 530010060
165,1 mm . . . . . . . . . . . . . . . . . . . . . . 530010066
8 in. (DN200) . . . . . . . . . . . . . . . . . . . 530010080
Flange x Flange ANSI
3 in. (DN80) . . . . . . . . . . . . . . . . . . . .530020030
4 in. (DN100). . . . . . . . . . . . . . . . . . . .530020040
6 in. (DN150). . . . . . . . . . . . . . . . . . . .530020060
8 in. (DN200) . . . . . . . . . . . . . . . . . . .530020080
Flange x Grove ANSI
3 in. (DN80) . . . . . . . . . . . . . . . . . . . .530030030
4 in. (DN100). . . . . . . . . . . . . . . . . . . .530030040
6 in. (DN150). . . . . . . . . . . . . . . . . . . .530030060
8 in. (DN200) . . . . . . . . . . . . . . . . . . .530030080
T x T NPT
1 1/2 in. (DN40) . . . . . . . . . . . . . . . . . 530060015
2 in. (DN50) . . . . . . . . . . . . . . . . . . . .530060020
Auto-
a
Auto-
a

Advertisement

Table of Contents
loading

Table of Contents