Kyocera ECOSYS MA2100cwfx Operation Manual page 270

Setup and Registration (System Menu) > System Menu
Timer Setting
[System Menu/Counter] key > [▲] [▼] key > [Common Settings] > [OK] key > [▲] [▼] key > [Timer Setting] > [OK] key
Configure settings related to the time.
Item
Auto Panel Reset
PanelReset Timer
Sleep Level (models except for
Europe)
(Detailed settings)
Sleep Rules (models for
Europe)
Sleep Timer
If no jobs are run for a certain period of time, automatically reset settings and return to the
default setting. Select to use Auto Panel Reset or not.
Value: Off, On
NOTE
The time allowed to elapse before the panel is reset is set with the following:
PanelReset Timer (page 8-26)
If you select [On] for Auto Panel Reset, set the amount of time to wait before Auto Panel Reset.
Value: 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [Auto Panel Reset] is set to [On].
Select the Sleep level.
Set the Energy Saver mode to reduce power consumption even more than Quick Recovery
mode.
Value: Quick Recovery, Energy Saver
Set whether to use the Energy Saver mode for the following functions individually:
• Network
*1
• Card Reader
• FAX
Value: Off, On
NOTE
When the machine enters Energy Saver, the ID card cannot be recognized.
Select whether to use the Sleep mode for the following functions individually:
• Network
*1
• Card Reader
• FAX
Value: Off, On
NOTE
When the machine enters Energy Saver, the ID card cannot be recognized.
Set amount of time before entering Sleep.
Value
1 to 60 minutes (1 minute increments)
Sleep (page 2-29)
8-26
Description