Technical Parameters For Combination Boilers (In Compliance With Regulation 813/2013) - Immergas VICTRIX OMNIA Manual

4.5 TECHNICAL PARAMETERS FOR COMBINATION BOILERS (IN COMPLIANCE WITH
REGULATION 813/2013)
Model/s:
Condensing Boilers:
Low temperature boiler:
Boiler type B1:
Co-generation appliance for central heating:
Mixed heating appliance:
Element
Nominal heat output
For central heating only and combination boilers: useful heat output
At nominal heat output in high temperature
mode (*)
At 30% of nominal heat output in a low
temperature mode (**)
Auxiliary electricity consumption
At full load
At partial load
In standby mode
For mixed central heating appliances
Stated load profile
Daily electrical power consumption
Contact information
(*) High temperature mode means 60°C on return and 80°C on flow.
(**) Low temperature mode for condensation Boilers means 30°C , for low temperature boilers 37°C and for other appliances 50°C of return
temperature.
The efficiencies and NO values in the following tables refer to the gross calorific value.
x
VICTRIX OMNIA
SI
NO
NO
NO Fitted with supplementary heating system:
SI
Symbol Value Unit Element
P 20 kW Seasonal energy efficiency of central heating
n
For central heating only and combination boilers: useful efficiency
At nominal heat output in high temperature
P 20,2 kW
mode (*)
4
At 30% of nominal heat output in a low
P 6,6 kW
temperature mode (**)
1
Other items
el 0,018 kW Heat loss in standby
max
el 0,011 kW Ignition burner energy consumption
min
P 0,004 kW Emissions of nitrogen oxides
SB
XL Domestic hot water production efficiency
Q 0,138 kWh Daily gas consumption
elec
IMMERGAS S.p.A. VIA CISA LIGURE, 95 - 42041 BRESCELLO (RE) ITALY
NO
Symbol Value Unit
η 91 %
S
η 87,3 %
4
η 95,8 %
1
P 0,055 kW
stby
P 0,000 kW
ign
mg/
NO 32
kWh
x
η 82 %
WH
Q 23,932 kWh
fuel
87